Carl R. Ice College of Engineering

Biological and Agricultural Engineering Classroom (1023 Seaton Hall) Instructions

Download PDF copy of instructions.

Technical support

Engineering Computing Services
785-532-4643
support@engg.ksu.edu

To turn on projector S1023-remote
  • The projector remote is located on the podium in the classroom.
  • To turn on projector , stand a few feet away and press the Power button. Two short beeps will indicate the projector has been turned on.
To turn off projector
  • To turn off the projector, stand a few feet away and press the Power button. A message will display Press Power Button to Turn off Projector so press the Power button again. Two short beeps will indicate the projector has been turned off.
To use the presentation system
  • If the computer is not on, it may be necessary to press the Power button located on the presentation system.
  • It may be necessary to tell the desktop to direct a signal to the projector. Locate the key on the keyboard, hold it down and press the "P" key simultaneously. Windows system display mode will appear (see below) and you will want to select Duplicate.
  • The projector will automatically switch to the appropriate input.
  • Three USB ports are available on the front of the presentation system for use of a flash drive or other USB device.
    • Warning: Security software on this computer will erase all changes made on the next reboot. This includes any files or data you may have created. These lost filesare non-recoverable. To use a network drive for your data, please activate the "ENGG Login" shortcut located on the desktop of the computer.

S1023-computer

To use a laptopS1023-vga-cable
  • Plug the provided VGA cable into your laptop and secure properly.
  • It may be necessary to tell your Windows laptop to direct the signal to the projector. Locate the key on your laptop, hold it down and press the "P" key simultaneously. Windows system display mode will appear, and you will want to select Duplicate.
  • If you are using a Mac laptop you will need to connect the provided VGA cable, click the upper left-hand Apple menu, select System Preferences, then Displays and finally select Detect Displays. Please locate your computer manual for keyboard shortcuts.
To use the cameraS1023-camera
  • 1023 Seaton Hall is now set up for Zoom conferencing.
  • You will need to manually select use of the microphones. Ceiling speakers are set to default.
  • The remote for the camera is located on the podium. It will be used to power on or off, and move camera positions. The camera may be slightly grainy. Be sure to turn the camera off when finished.