Bob Tointon Classroom (S2009) Instructions

Download PDF copy of instructions.

Technical support

Engineering Computing Services
785-532-4643
support@engg.ksu.edu

To turn the system on/off:

• To turn on: tap the touch panel screen to start the system. The television will turn on
  automatically.
• To turn off: tap Exit System at the top right corner, then tap your confirmation to exit.

Select your source:

On the left-hand side of the touch panel are source options, tap your selection:

Computer Main – presentation computer hooked up to the system (selected by default). May need to press the keyboard space bar to wake up the computer.

VGA Laptop – hook up your laptop via VGA and audio cable

HDMI Laptop – hook up your laptop via HDMI cable

Document Camera – use the document camera located on the podium.

USB-C Device - plug in your mobile device via USB-C cable provided.

Wireless Display – connect your device via Crestron AirPlay app. Follow the on screen directions on the monitor and TV to connect.

To use microphones:

• Three microphones are available for your use in this room. Two are located in a charging base
  on the podium, a handheld microphone, as well as a lapel microphone. There is also a podium
  microphone on the desk. Note: the handheld mic and lapel mic cannot be used at the same
  time.

Press and hold power button to turn mic on/off.	Flip open front of pack, press and hold power button to turn mic on/off.	Press button to toggle podium mic on/off. Light will indicate power.

• When finished using the handheld/lapel microphones, please place
  microphone or pack back into the charging station. Make sure the
  lapel mic wires do not interfere with the charging base, and devices
  are properly seated in charging base. Once microphones are inserted
  correctly, the light on the base will turn red. (Green indicates device
  is charged.)

Handheld and lapel microphone charging base

Extra controls

Camera controls control which camera is active, and allows for focusing on a certain point, zooming in/out, etc.

Recording controls allows you to record your
presentation, with record start/pause/stop. If you record an unscheduled presentation in this room, contact us at support@engg.ksu.edu to move the presentation to your requested folder of choice.

Television controls allows you to turn the TVs off and on, as well as “muting” the display
(turning the screen black while you use your device without displaying it to everyone).

Lighting and window shade controls

• Light switch button banks are located at both the back of the room, and on the wall behind
  the podium to control the room lighting.
• Control buttons for the window shades are located on the wall behind the podium. Presets
  have been configured for your use.

Overhead light controls	Window Shade controls